the work really should be undertaken by a qualified electrician that is accreditied by NICEIC, Napit, Stroma or Elecsa, the work is notifiable under special locations Part P, the current fuse board should have the shower circuit identified and be linked to a 40 amp MCB, depending on the reference method of how the cable was run, the power will be provided by either 6mm or 10mm t&e, a 10.5kw shower will need the 40 amp MCB upgraded to a 50 amp MCB and in turn depending on the method used to route the cable this will have to be 10mm or upgraded to 16mm, a qualified electrician will be able to carry the work out.

主要的事物是现有电缆大小、断路器和电路是否受民盟保护

幸运点和原安装淋浴的选手想未来校验, 你可能已经安装了10毫米平方电缆,8kw阵列电路通常用6mm平方电缆连接并配有40A断路器使用10.5kw阵列, 因为它持续拉出更多电源(45AMP区)电缆最少需要10m2处理电流和关联热积并需要受50A断路器保护, 否则你可能会有烦心跳动(除其他因素外 )

电工可清晨或全天由电工完成,视电缆运行访问量和长度而定

Regardnick-Efix电气安装