Ask a tradesperson
Windows
Windows letting in water
Had a survey on my windows from the supplier testing vent holes to glass size
Question on yourself s the glass should be 28mm but it's 27.5mm with you think its in tororence
Did say it could be the lathe when manufactured out by mm it has been seen he said
Thanks for all replies now and before
Been very useful
2 Answers from MyBuilder Window & Door Fitters
Best Answer
Hi. I wouldn't be concerned over 0.5mm the seals should cope with that.
A few options here to cure.
1. Remove and rin compressed air through the weep drain holes.
2. Replace seals.
3. Use auv stable sealer on the original seals.
Answered 21st Mar 2021
Yes it fine is it condensation has the drainage holes been checked
Answered 21st Mar 2021
