询问商人
锁匠
门锁似乎正在打磨
你好,I’ve just had a front door fitted and when you turn the key it grates as it’s turned ,I’ve mentioned this to the company and told them that my other door locks don’t do this .They have said it’s a different mechanism to other doors but as far as the mechanism goes it looks the same locking system but as far as I knew the key just turns the barrel lock locking the mechanism in position,in my opinion it is the barrel lock which is not accurate rather than anything to do with the mechanism it’s like the key itself is making the noise as if it’s not accurate the friction noise is felt by the key ,it’s not difficult to turn a slight resistance ,am I correct expecting the key to turn smoothly or is this classed as acceptable please ?what would cause a key seeming gritty when turning it please and do I have grounds to as for the barrel to be changed thanks in advance Kind regards Pete
Mybuilder Locksmiths的5个答案
最佳答案
很难说没有看到特定的门,但是我倾向于说这是锁的一个对齐问题。没有新的锁应该发出“打磨噪音”。正如其他人提到的那样,保留气缸的螺钉也可能太紧,这会导致这一点。可能是
只是稍微松动螺钉,以至于可以正常工作。谢谢
回答2020年9月16日
林肯•自2015年12月8日以来的成员•16工作,100%积极的回馈
嗨,皮特
它要么是稍微拧紧的枪管,因此枪管上的凸轮在锁定变速箱内摩擦,或者多点锁具有很可能是变速箱的故障。
无论哪种方式,如果是新事物,它不应该发生,并且您有权将其修复。
伊恩
回答2020年9月16日
它可能是尺寸错误的圆柱体或错误安装的手柄,将应变放在欧元缸上。但是,我认为气缸固定螺钉很可能无法正确安装。尝试拧开这个,然后轻轻锁定
回答2020年9月16日
你好
正确安装的正确对齐的门应在其所有动作中都光滑。
一些客户确实注意到将钥匙在Dimple样式锁上转动时略有差异。
但是,如果您对此不满意,它将使公司重新研究它,因为您显然对购买的产品不满意
回答2020年9月19日
相关问题
- UPVC后门不会锁定
嗨,锁上后门的问题 - 螺栓机制似乎正常,即。当我抬起手柄时,4个螺栓进入...
- 刚安装的UPVC门锁
嗨,只是安装了前门,当您转动钥匙时,它是坚韧的,似乎钥匙不是完全准确的矿石...
- Thumbturn锁定到门把手锁
嗨,我有一个带有锁定和致命螺栓机构的实体门。它在顶部有2个钩子,一个在...
- 多点门锁手柄旋转而无需锁定螺栓
嗨,我有一个旧的滑动露台门,在某个时候将被替换。目前,它已被两个螺栓锁定...